Manual

23/56
Group

Function
This
function
is that the camera memorizes the combination
of Presets, Pattern and/or Swings sequently and runs Presets,
Pattern and/or Swings repetitively. MAX. 8 sets of Group are
programmable. Each group can have MAX. 40 actions which
are the combination of Preset, Pattern and Swing. Preset
speed can be set up and the repeat number of Pattern & Swing
can be set up in Group setup. Dwell time between actions can
be set up also.
Preset 1 Patte r n 1 Swing 1
D
w
ell Tim
e
Max 40 Entities

Setting Groups
To set Groups, enter into
OSD menu
.

Running Groups
Method 1) <Run Pattern> [Group NO. + 20]
Method 2) <Go Preset> [Group NO. + 150]
ex) Run Group 7 : <Run Pattern> [27]
ex) Run Group 7 : <Go Preset> [157]

Deleting Groups
To
delete Groups, enter into
OSD menu
.
Other Functions

Power Up Action
This setting defines a specific activity (Preset, Pattern, Swing and Group)
to be performed in the event that the power to the camera is cycled.
This function enables the user to resume, after turning on power, the
last action being executed before turning off the power. Most of actions
such as Preset, Pattern, Swing and Group are available for this function
but Jog actions are not available to resume.

Auto Flip
In case tha
t
tilt angle
arrives at the top of tilt orbit(
90°
)
,
zoom module
camera turns on its axis by 180° at the top of tilt orbit and moves to
opposite tilt direction (180°) to keep tracing targets.

Park
ing
Action
This feature allows the camera to begin a spec
ified operation after a
programmed time of inactivity. This function makes the camera
automatically run a pre-defined action if there is no command from
controller for a pre-defined time period. “Wait Time” means how long a
camera should wait for from the previous-last (most recent) command
before running the pre-defined action. It can be set to 1 second ~ 3 hrs.
OPERATION
3