Manual

25/56
OSD Display
P/T/Z Inf ormation
Camer a ID
Alarm Inf ormation
Action Title
Preset Label
LABEL12345 PRESET1
01/JAN/2013
01:15:35 I:-2- O:1
CAM 1 15/4/x1/N
Date(D ay/Month/ Year)
Time(Hour/Min./Sec.)
 P/T/Z Information
Displays the amount of pan from zero degree vertical, the amount of
tilt
from zero degree horizontal and current compass direction. Also
identifies the amount of the zoom magnification.
 Camera ID Displays the selected Camera ID (Address).
 Action Title Identfies Actions
"SET PRESET xxx" When Preset xxx is memorized.
"PRESET xxx" When the camera reaches Preset xxx.
"PATTERN x" When Pattern x is in action.
"SWG
×
/PRESET xxx"
When Swing x is in action. Displays both of Swing
number and Preset number.
"UNDEFINED" When a undefined function is called to run
 Preset Label Displays preset labels when the camera arrives at presets.
 Alarm Information
Displays activated alarms.
This information shows current state of Alarm
Inputs and Relay Outputs. If an Input point is ON state, it will show a
number corresponding to each point. If an Input point is OFF state, '
''
'-
--
-'
''
'
will be displayed.
Example) The point 2 & 3 of inputs are ON and Output is ON, OSD will
show as below.
I:-23 O:1
OPERATION
3