Manual

27/56
Display Setup
DISPLAY SETUP
------------------------
CAMERA ID ON
PTZ INFORMATION AUTO
ACTION TITLE AUTO
PRESET LABEL AUTO
ALARM I/O AUTO
LANGUAGE ENG
<SET NORTH DIRECTION>
<PRIVACY ZONE>
BACK
EXIT
Display setup allows you to program how
labels are
displayed on the monitor. In case of AUTO, the
labels are displayed on the monitor when there are
any changes in parameters.

Camera ID
[ON/OFF]
Displays the selected Camera ID.

PTZ
Information
[ON/OFF/AUTO]
Displays the positions of pan/tilt,
zoom magnification and current
compass direction.

Action Title
[ON/OFF/AUTO]
Identifies Actions.
"SET PRESET xxx"
"PRESET xxx"
"PATTERN x"
"SWG/PRESET xxx"
"UNDEFINED"

Preset Label
[ON/OFF/AUTO]
Displays the preset labels when the
camera arrives at presets.

Alarm I/O
[ON/OFF/AUTO]
Displays the activated alarms. This
information shows the current state
of Alarm Inputs and Relay Outputs.
If an Input point is ON state, it will
show a number corresponding to
each point. If an Input point is OFF
state, '
''
'-
--
-'
''
' will be displayed.
Example) The point 2 & 3 of inputs
are ON and Output is ON.
I:-23 O:1

Language
[ENG/POL/FRN/ITL]
Selects a language for OSD menu.
OSD MENU
4