Manual

36/56
 Parking Action Setup
PARKING ACTION SETUP
------------------------
PARK ENABLE OFF
WAIT TIME 00:10:00
PARK ACTION HOME
BACK
EXIT
This feature allows the camera to begin a specified
action after a programmed time of inactivity.

Park Enable
[ON/OFF]
If Park Enable is set to ON, the
camera runs an assigned function
automatically if there is no PTZ
command during the programmed
"Wait Time".

Wait Time
[1~59 sec. / 1~180 min.]
Wait Time can be programmed
from 1 second to 180 minutes.

Park Action
[HOME/PRESET/PATTERN/SWING/G
ROUP/PREV ACTION]
This feature defines the activity
when the camera parks. If Park
Action is set to “HOME”, the
camera moves to the home position
which is memorized when the
system boots. If Park Action is set
to “PREV. ACTION”, the camera
runs the previous action which it
ran most recently.
OSD MENU
4