Manual

38/56
Preset Setup
PRESET SETUP
------------------------
PRESET NO. 1
CLR PRESET CANCEL
<EDIT SCENE>
<EDIT LABEL> LABEL123
RELAY OUT OFF
CAM ADJUST GLOBAL
BACK
EXIT

Preset
Number
[1~255
]
MAX.
209 Presets except the
Reserved Presets (Hot Keys)
Selects a preset number to set up. If a
selected preset is already defined, the
camera moves to the pre-defined position
and preset parameters such as Label and
CAM Adjust show on the monitor. If a
selected preset is not defined,
“UNDEFINED” shows on the monitor.

Clear
Preset
[CANCEL/OK]
Deletes the data of the selected Preset.

Edit
Preset Scene
Re
-
defi
nes the scene position of the
selected Preset.

Edit
Preset Label
Edits the label of the selected Preset to
show on the monitor when the preset
runs. MAX. 10 alphanumeric
characteristics are allowed.

Relay Out
Defines the relay output.

CAM Adjust
[GLOBAL/LOCAL]
WB(White Balance) and AE(Auto Exposure)
can be set up independently for each
preset. There are 2 modes, "Global" mode
& "Local" mode. The Global mode is that
WB and/or AE are/is set up totally and
simultaneously for all presets. The Global
parameter setup such as WB and AE can
be done in "ZOOM CAMERA SETUP" menu.
The Local mode is that WB and/or AE
are/is set up independently or separately
for each preset. The Local parameter
setup for WB and AE can be done in each
preset setup menu. Each Local parameter
such as WB and AE activates
correspondingly when the camera arrives
at each preset position. During jog
operation, Global WB/AE value should be
applied. All Local WB/AE values do not
change although Global WB/AE value
changes. The Local mode has the prior to
the Global mode.
OSD MENU
4