Manual

41/56
Pattern Setup
PATTERN SETUP
------------------------
PATTERN NO. 1
UNDEFINED
CLR PATTERN CANCEL
RUN PATTERN
<EDIT PATTERN>
BACK
EXIT
 Pattern Edit
EDIT PATTERN 1
------------------------
MOVE TO START POSITION
[NEAR:START /FAR:CANCEL]
EDIT PATTERN 1
[NEAR:SAVE /FAR:DELETE]
0/0/x1/N

Pattern Number
[1~8
]
Selects a Pattern number to edit. If the
selected pattern number is not
defined, "UNDEFINED" will be
displayed under the selected pattern
number.

Clear Pattern
[CANCEL/OK]
Deletes the data of the selected
pattern.

Run Pattern
Runs
the
Pattern for the test purposes
to check if it works properly.

Ed
it Pattern
Edits the selected pattern.
①
With the Joystick of your controller, move the
camera to the start position with an appropriate
zoom magnification. To start the pattern
recording, press NEAR key. To exit, press FAR key.
② Move camera with joystick of controller or run
preset function to memorize the path (mostly
curve path) in the selected pattern. The
movement by Joystick and preset movement will
be memorized in a pattern. After a pattern is
programmed, the remaining storage is displayed
in progress bar on the screen.
③ To save the data and exit, press NEAR key. To
cancel saving the data and delete the data, press
FAR
key
.
OSD MENU
4