Manual

7/56


 Preset, Pattern, Swing, Group, Schedule, Privacy Mask and More…
 MAX. 209 Presets are programmable and each preset can have its own
parameter values independently from the other presets.
For an example, refer to the below table.
Preset N
o.
White Balance
Auto Exposure
•••
Label
Remarks
Preset 1
C
ase
A
Case
3
“
E
NTRANCE
”
Preset 2
C
ase
C
Case
5
“
WAREHOUSE
”
•••
Preset 95
−
−
−
−
Reserved for
OSD
Menu
•••
Preset 255
C
ase
K
Case
9
“
TERRACE
”
 MAX. 10 sets of Swing are programmable. This function is that a camera
moves repetitively between two preset positions at programmed speeds.
 MAX. 8 Patterns are programmable. This function is that a camera memorizes
the path (mostly curve path) by the joystick of the controller and revives the
trajectory operated by the joystick as closely as possible.
 MAX. 8 sets of Group are programmable. This function is that a camera
memorizes the combination of Presets, Pattern and/or Swings sequently and
runs Presets, Pattern and/or Swings repetitively. A Group can be combined
upto 40 functions with any of Preset/Pattern/Swing.
 MAX. 8 Privacy Masks are programmable, not to intrude on any other’s
privacy.
 MAX. 8 sets of Schedule are programmable. This function is that a camera runs a
function such as Preset, Pattern, Swing or Group at an assigned time. Also this
function can be run periodically by pre-defined schedules.


 PTZ(Pan/Tilt/Zoom) Control
 With the RS-485 communication connection, MAX. 255 units of cameras can
be connected to a single controller.
 Pelco-D or Pelco-P protocols can be selected as a control protocol in the
current firmware version.


 OSD(On Screen Display) Menu
 OSD menu is provided to display the status of camera and to configure the
functions interactively. A P assword can be configured in OSD menu and OSD
menu can be protected.
 The information such as Camera ID, Pan/Tilt Angle, Time/Date, Direction,
Alarm Input and Preset is displayed on screen.
 Multi-Language OSD menu is supported.
I
NTRODUCTION
1