Manual

8/56


 Alarm In/Out Function
 3 alarm sensor inputs and 1 alarm sensor outputs are available.
 Alarm sensor input is decoupled with photo-couplers to avoid external
electric noise and shock perfectly.
 Both of N.O.(Normal Open) sensors and N.C.(Normal Close) sensors can be
used and the signal range of the sensor input is from DC 5.0V to 12.0V for
various applications.
 The camera can be set to move to a Preset position or to run functions such
as Pattern, Swing and Group when there are external sensor activations. Also
“Post Alarm” function is possible, which is supposed to activate after user-
defined time period and sequentially in succession to the action by external
sensor activations.


 Reserved Presets(Hot Keys)
 Most camera setup options can be set up easily and directly with the
reserved presets (Hot Keys), without entering into OSD menu. For more
information, refer to “Reserved Presets(Hot Keys)” in this manual.


 Dual Power Input
 The input power source is DC 12 V or AC 24 V.



Perfect Outdoor Environment Compatibility and Easy Installation
 The fans and heaters are built-in in the camera for cold and hot temperature
environment. Also idealistic mechanical design protects the camera from
water and dust. (IP67 when installed properly with wall mount bracket only)
 It is easy to install and repair the camera.
I
NTRODUCTION
1