Thank you for purchasing our product. Please read this User’s Manual before using the product. Changes may be made without notice.
Table of Contents Safety Information 2 Important Information Table of Contents ----------------------------------------------------------------------------- 2 The power supply cord is used as the main disconnect device. Ensure that an outlet is located near the monitor and is easily accessible.
type plug has two blades and a third grounding prong. ● This monitor is designed to operate on 100-240V AC supply. Do not connect too many appliances to the same outlet as this can cause electric shock. 3 MOUNTING ● Place the monitor on a secure table or have it properly mounted to the wall. Do not hang anything on the monitor. Caution: The wall mount must bear a minimum of five times the monitor’s net weight without causing damage.
Connection 5 1. Rear interface Explanation of connectors This section describes the jacks on the back panel of your monitor. There are several ways to connect devices. DC12V: Use only the power supply included with the monitor DVI: Connect with detachable DVI cable Remark: DVI cable is for Dual mode use only. VGA: Connect your computer, or other device with a VGA output, to this jack using a 15 pin D-sub cable. PC AUDIO IN: (Stereo mini jack) Use to obtain sound when a PC is connected to the VGA jack.
Connect the audio (red and white) cables to the AUDIO INPUT R and L jacks on the back of the monitor and to the Audio Output jacks on the DVR. 7 Viewing the Picture From the Connected Device 1. Plug in the monitor and the device if they aren't already plugged in. 2. Turn on the monitor and the device you want to view, for example a camera. 3. Repeatedly press the SOURCE button until you see AV displayed at the top of the monitor's screen.
If you want to use an external input source, before to select the source, you Menu Controls Setup need to connect the devices, otherwise when you select the source, the none or no signal will appear on the screen. Press the source button on the monitor or remote control and the menu will appear on the screen. Then press source to select the monitor item and press“ +/- ” to save it. VGA: The input source from VGA terminal output. DVI: The input source from DVI terminal output.
AUDIO BASS: Adjustment range:0-100 TREBLE: Adjustment range:0-100 BALANCE: Adjusts how much audio is sent to the left and right (-50 to +50). The intermediate value is 0. When indication value of balance increases toward +50, the volume of the right and left speaker increase and decrease. When the indication value of balance decreases toward -50 the volume of the right and left speaker increase and decrease.
2. AV Input Mode PICTURE AUDIO OSD BRIGHTNESS: Adjusts the brightness of the picture. CONTRAST: Adjusts the difference between the light and dark areas of the picture.
3. DVI Input mode PICTURE AUDIO CONTRAST: Adjusts the difference between the light and dark areas of the picture. BRIGHTNESS: Adjusts the brightness of the picture. COLOR TEMP: Press + or - button to go into the Color Temp sub menu. Press the “+” button to change the color intensity of the temperature selected (Normal, Warm, Cool, S-RGB, User) USER: USER-R : 0~255 USER-G : 0~255 USER-B : 0~255 OSD H-POSITION: Adjust the OSD image horizontally by pressing the + or – buttons.
Specifications Model Size VM15LCD VM17LCD VM19LCD 15 inch 17 inch 19 inch Aspect Ratio Resolution (H x V) Colors 4:3 1024 x 768 1280 x 1024 16.