User's Manual

Device Management

NVR User Manual

12.1.2 Port Configuration

Click StartàSettingsàNetworkàPort to go to the interface as shown below. Enter the HTTP port, HTTPS port, server port and RTSP port of the NVR,

enable “Anonymous” as needed and then click “Apply” button to save the settings.

HTTP Port: the default HTTP port of the NVR is 80. The port number can be changed to others like 81. The port is mainly used for web client access.

If you want to access the NVR through a web browser, you should enter IP address plus HTTP port in the address bar of the web browser like

http://192.168.11.61:81.

HTTPS Port: the default HTTPS port of the NVR is 443.

HTTPs provides authentication of the web site and protects user privacy. How to use it?

① Enter IP address plus HTTP port in the address bar of the web browser. Then enter username and password to log in. Click Functional

PanelàNetworkàHTTPS to go to the following interface.