User's Manual

Introduction
NVR User Manual
4
l Setting interfaces can be switched to one another conveniently by clicking the main menus on the top of the setting interfaces
l Supports NVR information viewing including basic, camera status, alarm status, record status, network status, disk and export status
l Supports factory restoring, import and export of the system configuration, log view and export and local upgrading by USB mobile device
l Supports auto recognition of the displayer’s resolution
l You can click the right mouse button at any interface to go back to the upper interface
l You can click the mouse wheel at any interface to go to the live view interface
l The display language and video format of the NVR will not be changed and the system logs will be reserved if you reset the NVR to factory
default
l Press and hold the right mouse button for 5 seconds in any interface to switch the output to VGA and the NVR will display the video at the
lowest resolution which the NVR supports
1.3 Front Panel Descriptions
The following descriptions are for reference only.
Name
Descriptions
REC
When recording, the light is blue
Net
When access to network, the light is blue
Power
Power indicator, when connection, the light is blue
1.4 Rear Panel Descriptions
To quickly get started, connect the following to your recorder in the following order, please refer to the following figure (N32NRE shown for reference).
1. Connect a monitor to the recorder via VGA or HDMI cable (not included).
2. Connect the included optical mouse into any USB port of the recorder.
3. Connect the power adapter to the recorder and plug power cord into a 120VAC 50/60Hz outlet.
4. Connect recorder to network (optional)