User's Manual

Remote Surveillance
NVR User Manual
107
system and Safari in MAC system. Here we take IE browser for example. When you access the NVR through IE for the first time, you need to download
and install the relative components for normal preview and playback. Please refer to the tips in the remote interfaces for details. The buttons and
icons on the top right corner of the remote interface are introduced as follows.
admin: the current login username.
Logout: click it to log out and return to the login interface.
Modify Password: click it to change the password of the current login user. Enter the current password and then set a new password in the popup
window. Click “OK” button to save the new password.
Local Settings: click it to change the local settings. Set the snapshot number and click “Browse” to set the snapshot path and record path as shown
below. Click “Apply” button to save the settings.
13.4.1 Remote Preview
Click “Live View” in the remote interface to go to the live view interface. The live view interface consists of the four areas marked in the following
picture.
Ø Start Preview
Select a window in the preview area and then click one online camera on the left panel to preview the camera in the window. You can click in
the tool bar to view all the cameras.
Ø Left Panel Introduction
Click on the left panel to hide the panel and click to show the panel. You can view all the added cameras and groups on the left panel.
l View Camera