User's Manual

EZ Setup & Main Interface
NVR User Manual
17
Click the main menus on the top of the camera management interface to go to corresponding interfaces. Refer to the picture below. For instance,
you can go to the system setup interface by clicking “System” tag.
3.2.3 Main Functions
Ø Camera
The module covers the functions such as Camera Management (see Chapter 4 Camera Management for details), Image Settings (see 5.4 Image
Configuration for details), Motion (see 9.2.1 Motion Configuration for details), and PTZ (see Chapter 6 PTZ for details) and so on.
Ø Record
The module covers the functions such as Encode Parameters and Record Schedule and so on. Please see Chapter 7 Record & Disk Management for
details.
Ø Alarm
The module covers the functions such as Sensor and Motion Alarm Handling and Alarm Out Settings. Please see Chapter 9 Alarm Management for
details.
Ø Disk
The module covers the functions such as Disk Management, Storage Mode and Disk Information and so on. Please see Chapter 7 Record & Disk
Management for details.
Ø Network
The module covers the functions such as TCP/IP, DDNS, Port, E-mail and Network Status and so on. Please see 12.1 Network Configuration for details.
Ø Account and Authority
The module covers the functions such as Account Management (see 11.1 Account Management for details) and Permission Management (see 11.3
Permission Management for details) and so on.
Ø System
The module covers the functions such as Basic Configuration (see 12.2 Basic Configuration for details), Device Information (see 12.8 View System
Information for details), Log Information (see 12.7 View Log for details) and Configuration File Import&Export (see 12.5 Backup and Restore for
details) and so on.