User's Manual

PTZ
NVR User Manual
34
image.
Move the cursor of the mouse to the camera image and then slide the scroll wheel of the mouse forward to zoom in the image, slide the scroll wheel
of the mouse backward to zoom out the image.
Ø Preset Setting
Click “Preset” to go to preset operation tab and then click “Add” button to pop up a window as shown below. Select the preset and then enter the
preset name in the window; finally click “OK” button to save the settings. You c an add 255 presets fo r e ach dome at most.
Adjust the dome’s direction and then click “Save Position” to save the current preset position (you can also click another preset in the preset list and
then save the preset position after adjusting the dome’s direction); click in the preset list to call the preset; click “Delete” button to delete the
selected preset.
You can also go to preset setting interface for preset setting, see 6.2 Preset Setting for details.
Ø Cruise Setting
Click “Cruise” to go to cruise operation tab and then click “Add” button to pop up a window as shown below left. You can add 8 cruises for each dome
at most.
① Enter the cruise name in the “Add Cruise” window and then click “Add preset” to pop up the “Add Preset” window (Before adding preset to the
cruise, please add preset of the dome first).
② In the “Add Preset” window, select the preset name, preset time and preset speed and then click “OK” button.
③ In the “Add Cruise” window, you can click to reselect the preset, then change the preset time and speed. Click to delete the preset.
Click “Add” button to save the cruise.
Click to start the cruise and click to stop the cruise in the cruise list of the cruise operation tab; click “Delete” button to delete the