User's Manual

Alarm Management
NVR User Manual
59
9.4.2 Face Match
① Click StartàSettingsàAlarmà Face Match to go to the following interface.
② Select the camera and then enable and click “Configure” under General to set the general configuration of face match.
l Enable general and select the schedule.
l Set the text and audio prompts of successful match and failed match as needed. Click to upload the audio.
l Select groups and set their similarity.
l Enable alarm output pulse as needed.
l Click “Copy To” to copy all settings to other cameras.
l Click to set the alarm linkage items after successful match as shown below. In this interface, “Snapshot”, “Push”, “Alarm-out”, “Buzzer”,
“Pop-up Video” “Pop-up Message Box” and “E-mail” can be configured or enabled. The alarm linkage settings are the same as the sensor alarm
(see 9.1 Sensor Alarm for details).