User's Manual

Alarm Management
NVR User Manual
62
① Click StartàSettingsàCameraà Smart SettingsàPeople Intrusion to go to the following interface.
②Select the camera, enable the people intrusion detection and set the duration and sensitivity.
③ Click “Apply” to save the settings.
④Click “Processing Mode” to go to the alarm handling configuration interface of people intrusion detection.
People Intrusion Detection Alarm Handling Configuration:
① Click StartàSettingsàAlarmà People Intrusion to go to the following interface.
② Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”. The alarm handling setting of
people intrusion detection alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).
③ Click “Apply” to save the settings. You can click “People Intrusion Config” to go to the people intrusion detection configuration interface.
9.4.5 People Counting
Only some versions may support this function.
People Counting Configuration:
This function is to calculate the number of people entering or exiting in the detected area on the video by detecting, tracking and counting the head
shapes of people.
① Click StartàSettingsàCameraà Smart SettingsàPeople Counting to go to the following interface.
② Select the camera, enable the people counting detection and set the duration, sensitivity, statistic cycle, enter threshold, departure threshold
and retention threshold.