User's Manual

Alarm Management
NVR User Manual
63
Statistic cycle: All, daily, weekly and monthly are optional.
Reset: The current number of people counting will be cleared and the statistic cycle will restart by clicking “Reset” button.
③ Set the alarm area and entrance direction. Click “Draw Area” and drag the mouse to draw a rectangle area. Drag the four corners of the rectangle
to modify its size and drag the lines of the rectangle to change its position. Uncheck the “Draw Area” if you finish the drawing. Click “Clear” to clear
the area. Click and drag the arrow or the other end of the arrow line to change the people entrance direction.
④ Click “Apply” to save the settings.
⑤Click “Processing Mode” to go to the alarm handling configuration interface of people counting detection.
People Counting Detection Alarm Handling Configuration:
① Click StartàSettingsàAlarmà People Counting to go to the following interface.
② Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”. The alarm handling setting of
people counting detection alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).
③ Click “Apply” to save the settings. You can click “People Counting Config” to go to the people counting detection configuration interface.
9.4.6 Object Detection
Object Detection Configuration:
① Click StartàSettingsàCameraàSmart SettingsàObject Detection to go to the following interface.
② Select the camera, enable the object detection and set the detect type. There are two detect types: Abandoned object and missing object.
Abandoned object: Alarms will be triggered if there are articles left in the pre-defined detection area.