User's Manual

Face Recognition
NVR User Manual
72
10 Face Recognition
10.1 Face Match View
The setting steps are as follow:
① Enable face detection function (see 9.4.1 Face Detection for details).
② Enable face match function and set the alarm linkage items (see 9.4.2 Face Match for details).
③ Go to live view interface and click on a face detection channel. This will bring a toolbar under the channel. Then click to go to the face match
interface of this channel. In this interface, you can switch the channel on the top right. You can also click on the top right corner of the live view
interface and then choose the face match tab to go to the face match interface of multi-channel as shown below.
For unknown faces, you can select this face and click under the captured face to register this face (see the following picture); click to
quickly go to the smart face search interface where you can search the matching face information; click to quickly go to the smart face playback
interface; click to view snapshot details.