User's Manual

PTZ
NVR User Manual
30
details.
 Edit Cruise
Select the camera and cruise in the “Cruise” interface. Enter the new cruise name and then click to save the cruise name. Click “Add Preset”
to add preset to the cruise. Click to edit the preset. Click to delete the preset from the cruise. Click one preset in the preset list and then
click to move down the preset and click to move up the preset. Click to start the cruise and click to stop it.
 Delete Cruise
Click in the camera list on the right side of the interface to display the cruise information of the dome and then click on the top right
corner of the cruise to delete the cruise.
6.4 Cruise Group Settings
Click StartSettingsCameraPTZCruise Group to go to the interface as shown below.
 Add Cruise Group
Click “Add Cruise” to add the cruise, or click to extend the cruise list and then click to add the cruise. After that, click “Play” on
the left panel as shown below to play the cruise lines in sequence.
 Delete Cruise
In the cruise list, click to delete the cruise.
6.5 Trace Settings
Click StartSettingsCameraPTZTrace to go to the interface as shown below.
 Trace Record
Select the PTZ camera and then click “Add” or extend the IPC information by clicking and then click to add a trace name. After
that, click “Start Record” and move the speed dome to change its position and set its trace. Then click “Stop Record” to complete the trace record.