User's Manual

SMT User Manual

Camera Management

view the live image of the camera in the popup window. Click to edit the camera (see

Add camera in 3.1 Startup Wizard for details). Click

to delete the camera. Click

the “Operation” header line and then click “Modify IPC Password” to pop up a window(check

the IPCs in the window, set the new password and then click “OK”; only the online IPCs’

passwords can be modified and a batch of IPCs’ passwords can be modified at the same time).

Click to upgrade an online IPC ( or click in the “Upgrade” header line and then click

“IPC Batch Upgrade” to upgrade a batch of IPCs), select the device which stores the upgrade

file in the “Device Name” item of the popup window and the upgrade file in the list(you should

select the upgrade IPC model in the window if a batch of IPCs’ passwords need to be modified)

and then click “Upgrade” to start upgrading(the IPC will restart automatically after the upgrade

is completed successfully).

Note:

If you use the SMT with the PoE network ports, the IP cameras/panels (with PoE function)

which are directly connected to the PoE port of the SMT will be displayed automatically in the

camera list. Refer to the picture below. The IP camera/panel which occupies the PoE resource

has a prefix shown before its camera name. The prefix consists of PoE plus PoE port number.

The IP camera which connects to the PoE port cannot be deleted from the camera list manually.

 The IP camera directly connected to the PoE port of the SMT through private protocol will

be shown automatically in the camera list.

 One of the two conditions must be met if the IP camera/panel which is directly connected

to the PoE port of the SMT through ONVIF protocol should be shown automatically in the

camera list.

 The IP camera/panel which is directly connected to the PoE port is in the same

network segment with the internal Ethernet port.

 The DHCP (obtain an IP address automatically) of the IP camera/panel which is

directly connected to the PoE port is enabled.

If the IP camera which is connected to the PoE port cannot be displayed automatically in the

camera list, please refer to Q6 in Appendix A FAQ for details.