User's Manual

10
Brightness: Set the brightness level of the camera’s image.
Contrast: Set the color difference between the brightest and darkest parts.
Hue: Set the total color degree of the image.
Saturation: Set the degree of color purity. The purer the color, the brighter the image is.
Sharpness: Set the resolution level of the image plane and the sharpness level of the image edge.
DNR: Digital noise reduction.
Defog: Activatingthis function and setting an appropriate value as needed in foggy, dusty, smoggy or rainy environment to get clear
images.
Auto Iris: If your camera is auto Iris, please enable it.
Backlight Compensation (BLC):
 Off: disables the backlight compensation function. It is the default mode.
 WDR: WDR can adjust the camera to provide a better image when there are both very bright and very dark areas simultaneously
in the field of the view by lowering the brightness of the bright area and increasing the brightness of the dark area.
Recording will be stopped for a few seconds while the mode is changing from non-WDR to WDR mode.
 HLC: lowers the brightness of the entire image by suppressing the brightness of the image’s bright area and reducing the size of
the halo area.
 BLC:Ifenabled, the auto exposure will activate according to the scene so that the object of the image in the darkest area will be
seen clearly.
HFR: High Frame Rate. If “ON” is selected, the system will restart and then the maximum value of the frame rate of the main stream
can be set to 60 fps /50fps.
Antiflicker: