User's Manual
36
4.6.3 Block and Allow Lists
Go toSecurityBlock and Allow Lists as shown below.
The setup steps are as follows:
Check the “Enable address filtering” check box.
Select “Block/Allow the following address”, IPv4/IPv6/MAC and thenenterIP address or MAC address in the address box and click the
“Add” button.
4.6.4 Security Management
Go toSecuritySecurity Management as shown below.
In order to prevent against malicious password unlocking, “locking once illegal login” function can be enabled here. If this function is
enabled, login failure after trying six times will make the login interface locked. The camera can be logged in again after a half hour
or after the camera reboots.
4.7 MaintenanceConfiguration
4.7.1 Backup and Restore
Go toMaintenanceBackup & Restore.