Quick Start Guide

12|Page
200NewHighway*Amityville,NY11701*www.SpecoTech.com
TechnicalSpecifications
AmplifierOutput 2x80WMax
AmplifierImpedance 4‐16Ohms
Wirelessnetwork IEEE802.11b/g/n2.4G
LAN single10/100MRJ45
FrequencyResponse 20Hzto20KHz
Powerinput DC24V,6A
AudioSourceInput USB2.0,Coaxial,AnalogRCA,Optical(2.1)
AudioSourceOutput AnalogRCA
Treble Yes
Bass Yes
VolumeKnob Yes
Dimensions: 6.25“Lx5.75“Wx1.6“H
Weight 1.2Lbs.
Musicformat MP3/AAC/AAC+/ALAC/APE/WAV
Decoding Upto24bit/192KHz
1.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:
(1)Thisdevicemaynotcauseharmfulinterference,and
(2)Thisdevicemustacceptanyinterferencereceived,14includinginterferencethatmaycauseundesired
operation.
2.Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidthe
user’sauthoritytooperatetheequipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovide
reasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interferenceto radio or televisionreception, whichcan bedeterminedby turning the equipment off and
on,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
‐‐ Reorientorrelocatethereceivingantenna.
‐‐ Increasetheseparationbetweentheequipmentandreceiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐‐ Consultthedealeroranexperiencedradio/TVtechnicianforhelp.