User's Manual

Table Of Contents

Focus

Zoom

Cover

2. Route and connect the cables .

3. Secure the mounting base with camera to the wall with screws as shown below.

4. Bracket adjustment. Before adjustment, preview the image of the camera on a monitor and then loosen the

fixed ring to adjust the view angle of the camera. Tighten the fixed ring after the adjustment.

5. Focus and zoom adjustment ( If the camera you get is fixed lens, please skip this step). Open the cover

of the camera then adjust the focus and zoom screws to get a clear image. Finally, install the cover

back to the camera.

►Mounting for Dome Camera

and the cable hole on the wall according to the drill template.

Attach the drill template to the place where you want to fix the camera and then drill the screw holes

● Mounting for VLD5/VLD6M

Fixed Ring

Pan 360°

Tilt 80°

Rubber plug

90° Tilt

360° Rotation

360° Pan

Fixed Ring

VLB6

VLB5