Quick start Guide

Android Devices
App Installation on Android Devices
Android Devices
App Installation on Android Devices
Speco Connect l WIFIMOD Quick Guide
4
www.specotech.com
Speco Connect l WIFIMOD Quick Guide
5
www.specotech.com
Speco Connect l WIFIMOD Quick Guide
6
6
www.specotech.com
iOS Devices
App Installation on iOS Devices
Speco Connect l WIFIMOD Quick Guide
7
7
www.specotech.com
iOS Devices
App Installation on iOS Devices
4.5. The app will search for "Speco". If several “Speco” products
are detected, make sure to select the right one by checking
the “Mac Address” printed on the bottom of the unit.
4.6. Once “Speco” is accessed, the available Wi-Fi will be listed.
Select the desired Wi-Fi from the list and input the SSID password
to connect. Once the registration is done after configuration, the
status LED will change from blinking to solid.
– If the status LED is still blinking after more than 30 seconds, the
registration is not successful. Please repeat the registration procedure.
4.7. You can verify the video connection by selecting the registered
"Speco" from the camera list. Once connected, the camera can
be added to various Speco systems just like any other Speco IP
camera, including SecureGuard(R) VMS, SecureGuard(R) Mobile,
and Speco NVRs.
– Online_IP: Device is connected using IP Mode.
– Offline: Camera is disconnected.
(The Offline maybe due to network or server status, and the
status check will repeat every 15 sec.)
– Select the right “Speco” from searched Wi-Fi list using iOS
Wi-Fi Configuration Menu.
–
If several “Speco” products are detected, make sure to select the right
one by checking the “Mac Address” printed on the bottom of camera.
4.5. For iOS Devices’ security, access “Speco” first using the iOS
Wi-Fi Configuration Menu and return to “Speco Connect” App.
4.6. The default password for “Speco” is “12345678”. Access “Speco”
by inputting the Password, and run the “Speco Connect” App.
4.8. You can verify the video connection by selecting the registered "Speco"
from the camera list. Once connected, the camera can be added to
various Speco systems just like any other Speco IP camera, including
SecureGuard(R) VMS, SecureGuard(R) Mobile, and Speco NVRs.
– Online_IP: Device is connected using IP Mode.
– Offline: Camera is disconnected. (The Offline maybe due to network
or server status, and the status check will repeat every 15 sec.)
–
If the status LED is still blinking after more than 30 seconds, the
registration is not successful. Please repeat the registration procedure.
4.7. On “Speco Connect” App, the available Wi-Fi will be listed.
Select the desired Wi-Fi from the list and input the SSID password
to connect. Once the registration is done after configuration, the
status LED will change from blinking to solid.