User Manual

TITLE : up to 12 characters.

SWAP : Swap the start point for the end point.

1. Select “NUMBER” and set the desired number by pushing the Joystick to the left or right.

2. To edit the “TITLE”, follow the procedure of the Auto Scan above to edit titles.

3. Select “START ANGLE”. Hold down the CTRL key while selecting the start position using the

Joystick. Current panning position will be displayed. Release the CTRL key to complete the

selection of the start position. Or press the IRIS Open key then the “CTRL” displays. Move the

desired position. Press the IRIS Close key then the “CTRL” disappears. To adjust at the 0.1

degree interval, twist the Joystick at the pan field and the tilt field.

4. Select “END ANGLE”. Hold down the CTRL key while moving the Joystick to select the end

position. Release the CTRL key to complete the selection of the end position. Or press the

IRIS Open key then the “CTRL” displays. Move the desired position. Press the IRIS Close key

then the “CTRL” disappears. To adjust at the 0.1 degree interval, twist the Joystick at the pan

field and the tilt field.

5. Select “SWAP”. Set to ON to exchange the start angle and the end angle.

6. Select “SAVE AND EXIT” and push the Joystick to the right or press the IRIS Open key.

Press the ESC or IRIS Close key to exit the program without saving.

3.11 Privacy Zone

Hide up to 8 unwanted scenes in a camera.

PRIVACY ZONE SETUP

(CTRL KEY)

NO TITLE METHOD

01 ABC ON BLOCK

02 DEF ON V.OFF

03 OFF ----

04 OFF ----

05 OFF ----

06 OFF ----

07 OFF ----

08 OFF ----

SAVE AND EXIT(ESC TO CANCEL)

1. Place the cursor at the title field.

2. Hold down the CTRL key displays the privacy area menu while selecting the position using the

Joystick. Current position will be displayed. Release the CTRL key to complete the selection

of the position.

Or press the IRIS Open key then the privacy area menu displays. Move the desired position.

Press the IRIS Close key then the “CTRL” disappears and returns to the previous menu.

PRIVACY AREA MENU

(CTRL KEY)

CONTROL

NUMBER 001

354.8 344.8