User Manual

24
3. Place the cursor at the “TITLE” field. Twist the Joystick to enter the title edit mode. Follow the
procedure of the Auto Scan above to edit titles.
4. To turn the stored zone On or Off, twist the Joystick or press the Tele or Wide key.
5. Set the “METHOD”, “BLOCK” or “V.OFF(video off)”.
6. Select “SAVE AND EXIT” and push the Joystick to the right or press the IRIS Open key.
Press the ESC or IRIS Close key to exit the program without saving.
NOTE: Press the HOME key to delete programmed Privacy Zone at the title field.
3.12 Camera Menu
CAMERA SETUP
FOCUS CONTROL
WB CONTROL
AE CONTROL
DNR CONTROL
LINE LOCK CONTROL
SHARPNESS : 05
RESOLUTION : LOW
DIGITAL ZOOM : OFF
IMAGE FLIP : OFF
PRESET FREEZE : OFF
STABLIZATION : OFF
SAVE AND EXIT(ESC TO CANCEL)
SHARPNESS The higher the value, the more edges in the picture will be
enhanced. (0 ~ 15)
RESOLUTION Select resolution mode (LOW / MID / HIGH)
DIGITAL ZOOM OFF: Zoom range is limited to the optical.
2X: Zoom is extendable up to 2X of digital range.
4X: Zoom is extendable up to 4X of digital range.
8X: Zoom is extendable up to 8X of digital range.
MAX: Zoom is extendable Max digital zoom range.
IMAGE FLIP This function turns the video output from the camera upside down and
reverses it horizontally.
This option is helpful to install in the opposite side.
PRESET FREEZE ON: the image is frozen during calling Preset.
STABILIZATION ON: To increase the stability of an image from frame-to-frame jitter with
shaking.
• FOCUS CONTROL
FOCUS SETUP
MODE : AUTO
FOCUS LIMIT : 1.0M
SAVE AND EXIT(ESC TO CANCEL)
MODE AUTO / MANUAL / ONE PUSH / CONSTANT MANUAL
Use manual mode in normal use.