User Manual

3.13 Dome Setup

CONFIGURATION MENU

LANGUAGE : ENGLISH

HOME FUNCTION SETUP

OSD DISPLAY

VIEW ANGLE SETUP

INITIALIZE DATA

ORIGIN OFFSET

DOME RESET

SYSTEM MENU

SYSTEM INFORMATION

SAVE AND EXIT(ESC TO CANCEL)

• LANGUAGE SETUP

LANGUAGE : Select the desired language.

• HOME FUNCTION SETUP

HOME FUNCTION SETUP

HOME FUNCTION : NONE

FUNCTION NUMBER : ---

WAITING TIME : 120 SEC

FUNCTION ENABLE : OFF

SAVE AND EXIT(ESC TO CANCEL)

HOME FUNCTION : None / Tour / Pattern / Auto Scan / Preset

FUNCTION NUMBER : - - -

WAITING TIME : 10 ~ 240 seconds

FUNCTION ENABLE : ON / OFF

The Home function can be set so that the camera automatically goes to Tour, Pattern,

Auto Scan or Preset after the keyboard controller has been idle for a specified amount of time.

For example, if the controller is idle for 120 seconds, the camera goes to Preset 1.

Follow these steps to program the Home position:

1. Select “HOME FUNCTION” by pushing the Joystick to the left or right to scroll through the

None, Tour, Pattern, Auto Scan or Preset functions.

2. Select “FUNCTION NUMBER” and push the Joystick to the left or right. The recorded

function number will scroll.

3. Select “WAITING TIME” and push the Joystick to the left or right to select from 10 to 240

seconds.

4. Select “FUNCTION ENABLE” and turn to ON or OFF by pushing the Joystick to the left or

right.