User Manual

Operation Instruction

Select the Finish button to finish the EZ Record and select

the Go to EZ Network button to start the EZ Network.

Figure 18 — EZ Network screen.

If you selected the Go to EZ Network, select the Next button

to start the EZ Network.

Internet Connection

Select whether or not your DVR is connected to the Internet.

LAN Setup

Select between Auto Configuration and Manual Configuration

for network configuration, and then select the Test button to

test the network configuration you selected.

NOTE: Selecting Auto Configuration allows the DVR to

automatically obtain LAN parameters (IP address,

Gateway, Subnet Mask and DNS Server address).

Selecting Manual Configuration allows you to set

up LAN parameters manually.

NOTE: The network configuration you set should be tested

by selecting Test, otherwise the Next button will

cannot be selected, and cannot move to the next

step.

 Use DSL/PPPoE Setup: Selecting the box allows you to

set up the DSL network. Entering the ID and password for

DSL connection is required.