User Manual

Operation Instruction

CAUTION: The USB device for clip copy must be FAT 16 or FAT32 format.

The DVR automatically assigns a file name to the video clip. However, you can give the video clip file a different name.

Highlight the box beside File Name and press the

button. A virtual keyboard appears. Enter a file name for the

video you are backing up and select Close. The DVR will automatically add the camera number (for example “01”)

and “.exe” to the file name.

NOTE: When naming a file, you cannot use the following characters: \, /, :, *, ?, “, <, >, |.

Highlight Include Text-In Data and press the button. This will toggle between On and Off. When this feature is

On, you can include text-in data when copying video if the video was recorded with text-in data.

Highlight Use Site Info and press the button. This will toggle between On and Off. When this feature is On, you

can add the site information to the file name for the video you are backing up.

NOTE: When the site information is added to the file name, some special characters (\, /, :, *, ?, “, <, >, |) in the

site information will be converted to “_”.

Once you have given the video clip a file name, highlight the Start button and press the button. The confirmation

screen displaying data size will appear. When the storage device does not have enough space, the DVR will ask if you

want to copy as much of the video clip as possible in the available space. Highlight the Continue button and press

the

button to continue clip copy.

Once the clip copy starts, you can cancel it by selecting Cancel or hide the screen by selecting Close. When selecting

Close, Clip Copy continues and a confirmation screen will display when complete.

NOTE: The file size for clip copy is limited to 30GB. When copying video clips larger than 2GB, the video clips will

be save in units of 2GB. For example, 3 individual 2GB files will be created when saving a 6GB video clip.

However, the file size for the One-Touch Clip Copy is limited to 2GB.

You can use other functions on the DVR while video is being backed up. To do this, highlight the Close button and

press the

button. You can return to the Clip-Copy screen at any time to check the progress.

You do not need to install any special software on your personal computer to review the video clips. Refer to Speco

Central Operation Instruction for instructions on how to review video clips you have copied.

NOTE: During Clip Copy, you cannot shut the system down, clear data on the storage device, or format the

storage device.

CAUTION: Do NOT disconnect the USB cable or the power from the external drive while copying

video clips. If the external drive is shut down or the USB cable is disconnected while

copying video clips, THE DVR SYSTEM MAY NOT WORK NORMALLY OR THE EXTERNAL

DRIVE COULD BE DAMAGED, and you will get an error message the next time you try

to copy video clips. You will need to power down the DVR and restart it to get rid of the

error message. Once the file system of the USB hard disk drive has been corrupted, this

error message cannot be dismissed. Even after restarting the DVR it may automatically

restart while preparing to clip copy. You must recover the file system using the recovery

program, or you must reformat the hard disk drive.