User Guide

SEQUENCE

DWELL TIME

Set the dwell time of each, single channel display in sequential display

mode (3~60seconds)

SITE

Select a channel to apply the name and covert settings change using the

mouse or the remote control.

Select a channel to apply the following settings using the mouse.

NAME

Set the channel name. Press the right square button and set the channel

name and select OK using the mouse.

The name can be made up to 36 characters.

COVERT

Enable/disable display of the specified video channel in live display.

COLOR TUNING

Brightness: Change the brightness value. (0~100)

Contrast: Change the contrast value(0~100)

Hue: Change the hue value(0~100)

Saturation: Change the saturation value(0~100)

Sharpness: Change the sharpness value(0~100)

VIDEO OUTPUT

(HDMI)

Select video output resolution, Support 3840x2160, 2560x1440,

1600x1200, 1280x1024, 1920 X 1080, 1280 X 720

SUB MONITOR

OUTPUT

Select Sub Monitor Video out.

CVBS or SPOT