User Guide

56
Indicates that sequencing mode is enabled.
Displays the current date and time.
RC: ALL Remote control ID display. If a remote ID is not set, the message “ALL” is
displayed.
When Overwrite is not enabled, this displays the percent of the hard disk
usage from 0-99%.
When Overwrite is enabled, the Bar will indicate with Overwrite
Continuous recording in progress.
Manual recording in progress. To set the Manual recording mode, press the
Record button on the front panel.
Motion alarm recording in progress.
Sensor recording in progress.
Table 5.1.2. Menu Items in Quick Operation Window
Icon Description
Search Select this option to enter the Search menu.
Setup Select this option to enter the Setup menu.
Display Display layout. Select between different multi-view display formats.
D8HU: 1x1, 2x2, 3x3; D16HU: 1x1, 2x2, 3x3, 4x4
Aspect Ratio Select ‘Auto Stretch’ or ‘Pass Through’
Snapshot Click this option to create a snapshot of selected channel image.
(BMP Still Image)
Super EZ Copy Direct Backup of the selected channel to USB flash drive without going
through the search mode.
Enable Manual
Record
Manual Record button. Click this button to enable manual recording.
Also known as Panic Record.
Advanced Menu
EZ Setup Select this option to start EZ Setup Wizard
Audio Select this option to set an audio channel to output;
(Channel 1 through 4, Audio Mute).
Camera PTZ Select this option and the PTZ user interface will appear.
Enabel Main
Monitor Sequence
Select this option to enable/disable sequence function.
Disable Alarm Out Click this button to enable/disable Alarm outputs
Manual Window where users can manually trigger the digital deterrent audio