INSTRUCTION MANUAL Intensifier T Series HD-TVI Camera HTINT70T, HTINT701T, HTINT702T (Bullet Camera) HTINT60T, HTINT601T (Turret Camera) HTINT591T (Dome Camera) HT7246T / HT7250T (Dome Camera) HTINT40T (Miniature Camera) Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev.
Contents ◑ Contents....................................................... 1 ◑ Precautions.................................................. 2, 3 ◑ Safety Instructions....................................... 4 ◑ Package Contents........................................ 5 ◑ Camera Installation...................................... 6-12 ◑ Lens Adjustment.......................................... 13-15 ◑ Specifications............................................... 16-20 ◑ Camera Dimension......................
Precautions Do not install the camera in extreme temperature conditions. Only use the camera under conditions where temperatures are between -10°C and +50°C. Be especially careful to provide ventilation when operating under high temperatures. Never keep the camera pointed directly at strong light. It can cause malfunctions to occur. Do not install the camera under unstable lighting conditions. Severe lighting change or flicker can cause the camera to work improperly.
3
Safety Instructions Precautions for use ◑ This camera should be installed by qualified personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ Use appropriate low voltage power cable to prevent fire or electrical shock ◑ Please insure that your installation area can support the weight of the camera Please handle this camera carefully : ◑ Do not use a strong
Package Contents Please make sure that the following items are included in the Package: 1) HTINT70T, HTINT701T, HTINT702T • 1 Video Test Connector, Power Jack • 1 Focus Adjustment(HTINT70T) • 1 Bracket Base • 1 Wrench • Set Screw - 4 Tapping Screws 4x25 - 4 Hexagon Socket Screws M5x10 2) HTINT60T, HTINT601T • 1 Video Test Connector, Power Jack • 1 Wrenches • Set Screw - 3 Tapping Screws 4x25 3) HTINT591T • 1 Video Test Connector, Power Jack • 1 Chameleon Cover • 1 Wrench • Set Screw - 3 Tapping Screws 3.
CAMERA INSTALLATION CONNECT POWER CABLE 1. WHEN USING 12 VOLTS DC (constant voltage 500mA) P o w e r In p u t :R E D C e n te r : (+) D C 12V P owe r S upply 2. WHEN USING 24 VOLTS AC (40 Volt Amps) R E D (+) A C 24V B L A C K :(-) P owe r S upply 3. CONNECT VIDEO CABLE 1) WHEN USING IT AS ANALOG OUTPUT, CONNECT YELLOW COLOR BNC CABLE TO THE BNC JACK. CVBS 2) WHEN USING IT AS TVI OUTPUT, CONNECT BLACK COLOR BNC CABLE TO THE BNC JACK.
CAMERA INSTALLATION Compatibility 1) HTINT70T, HTINT701T, HTINT702T CVCJBB INTJBS INTCM 2) HTINT60T, HTINT601T CVCJBD → 7 Adaptor plate(60PLATE) with rubber
CAMERA INSTALLATION Compatibility 3) HTINT591T CVCJBD → Adaptor plate(59PLATE) with rubber 4) HT7246T, HT7250T INTWM INTPM CVCJBD 8 DFM
CAUTION : The installation instructions in this manual are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. CAMERA INSTALLATION 1.
CAMERA INSTALLATION 2.
CAMERA INSTALLATION 3. HTINT591T VANDAL DOME BASE SCREW TS T1, 3.
CAMERA INSTALLATION 4.
LENS ADJUSTMENT 1.
LENS ADJUSTMENT 2.
LENS ADJUSTMENT 3.
Intensifier T Series DC Auto Iris Varifocal Lens 2.8-12mm,5-50mm / 3.6mm Fixed Board Lens ■ HTINT70T (2.8-12mm) ■ HTINT701T (3.
Intensifier T Series DC Auto Iris Varifocal Lens 2.8-12mm / 3.6mm Fixed Board Lens ■ HTINT60T (2.8-12mm) ■ HTINT601T (3.6mm) SPECIFICATIONS HTINT60T / HTINT601T MODEL Image Sensor Pixels - total Pixels - Effective Resolution Scanning System S/N Ratio Video Output Minimum Illumination Shutter Speed BLC HSBLC WDR ACE(D-WDR) Day&Night White Balance Smart-IR Sense-Up Motion Digital Noise Reduction De-Fog brightness AGC Privacy Mirror Sharpness Defect Coaxial Communication Language Lens Power 1/2.
Intensifier T Series 3.6mm Fixed Board Lens ■ HTINT591T (3.
Intensifier T Series DC Auto Iris Varifocal Lens 2.8-12mm,5-50mm ■ HT7246T (2.8-12mm) ■ HT7250T (5-50mm) SPECIFICATIONS HT7246T / HT7250T MODEL Image Sensor Pixels - total Pixels - Effective Resolution Scanning System S/N Ratio Video Output Minimum Illumination Shutter Speed BLC HSBLC WDR ACE(D-WDR) Day&Night White Balance Smart-IR Sense-Up Motion Digital Noise Reduction De-Fog brightness AGC Privacy Mirror Sharpness Defect Coaxial Communication Language Lens Power 1/2.
Intensifier T Series 3.6mm Fixed Board Lens ■ HTINT40T(3.6mm) SPECIFICATIONS MODEL Image Sensor Pixels - total Pixels - Effective Resolution Scanning System S/N Ratio Video Output Minimum Illumination Shutter Speed BLC HSBLC WDR ACE(D-WDR) Day&Night White Balance Smart-IR Sense-Up Motion Digital Noise Reduction De-Fog brightness AGC Privacy Mirror Sharpness Defect Coaxial Communication Language Lens Power Power Consumption Operating Temperature Storage Temperature Dimension Weight HTINT40T 1/2.
CAMERA DIMENSION 1) HTINT70T, HTINT701T, HTINT702T 8.27” 3.94” dia 4.80” 3.46” 3.01” 3.38” 2.95” 4.65” dia 21 3.01” 2.66” 3.
CAMERA DIMENSION 3) HTINT591T 1.82” 4.72” dia 3.35” 3.23” dia 4) HT7246T, HT7250T 5.10” dia 3.46” 1.16” 5.10” dia 3.
CAMERA DIMENSION 5) HTINT40T 1.34” 0.65” 1.34” 1.
General Features ● Transfer Video Interface The combination of a 2Mega CMOS image sensor and TVI DSP provides an excellent resolution of TVI picture. ● 3D-DNR Smart 3DNR prevents the image blurring of moving object and activates only if moving objects are appearing on the scene. ● Smart-IR No saturation image, vivid image in darkness! "TVI" camera makes very sharp video image in darkness! This technology eliminates saturation of video image of the closer object in darkness by control of the IR sensitivity.
How to Set Up the camera menu ● Setup Menu MENU 1.PRESET 1.LENS DC MANUAL 2.EXPOSURE INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY(WDR) / ELEVATOR MODE INDOOR / OUTDOOR / DEBLUR RETURN MODE NORMAL / DEBLUR RETURN BRIGHTNESS 0~20 AUTO SPEED 1/30 ~ 1/30000 SHUTTER MANUAL RETURN FLICKER INTENSIFY OFF ~ X32 AGC 0~20 RETURN AUTO AWB AWC-SET 3.
How to Set Up the camera menu ● Setup Menu MENU OFF 7.IMAGE PRIVACY ON ZONE NUM ZONE DISP H-POS V-POS H-SIZE V-SIZE Y LEVEL CR LEVEL CB LEVEL RETURN 0~15 ON/OFF 0~60 0~34 0~60 0~34 0~20 0~20 0~20 RETURN OFF 8.MOTION ON SENSITIVITY WINDOW TONE WINDOW ZONE WINDOW USE DET H-POS DET V-POS DET H-SIZE DET V-SIZE ALARM RETURN COM. IMAGE RANGE 9.SYSTEM FRAME RATE COLOR SPACE CVBS LANGUAGE COLOR BAR RESET RETURN 3. EXIT 10.
Menu Set Up Menu items can be selected by using the OSD buttons of the camera. 1. PRESET SPECO TECH 1. PRESET INDOOR 2.MAIN SETUP 3.EXIT 1-1. Preset : INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY(WDR) / ELEVATOR. - Used for a quick and easy setup for the installation environment. * The Advaned Set Up menu will be displayed on the monitor. 2. Move and select the required function using the Up and Down button.
3. Change menu settings using the Left or Right button. * Available values or Status are displayed by pressing the Left or Right buttons. Press the button until desired value / status is displayed. 4. After Changing the setting move the arrow indicator to EXIT and press the SET button to EXIT. NOTE * Move to the available submenu by moving arrow to desired feature. * Submenu is not available when this symbol displayed “---“. LENS 1.
NOTE MODE MODE RETURN INDOOR * When you select the mode setup, you can select INDOOR, OUTDOOR or DEBLUR depending on the installation environment. *On manual mode, you can select NORMAL or DEBLUR depending on the installation environment. EXPOSURE 1. On the Set Up menu, Select EXPOSURE by using the Up or Down button. 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM RETURN MENU DC AUTO OFF MIDDLE AUTO OFF 2.
◆ BRIGHTNESS : The brightness can be adjusted. The brightness control range is 1~20. ◆ SHUTTER : DC lens is launched with the setting of 1/30 and the manual lens is launched with the setting of Auto shutter, but the shutter speed can be adjusted from 1/30 to 1/30,000. → FLK : Select FLK mode if flickering occurs ; caused by the unmatched frequency of electric light. NOTE * Sense-Up mode does not work when Electronic shutter is set to Manual.
◆ AUT0 : Use this mode when the color temperature is from 2,500k to 9,500k. ◆ AWB : The function to search for the color which is matched well with the ambient environment. ◆ AWC→SET : After letting camera focus on the blank white paper to the best condition of current lighting environment, press the SET button. If the lighting condition is changed, Re-adjustment should be needed. ◆ MANUAL : Manual compensation make the more detailed control possible.
BACKLIGHT On this menu, backlight image can be compensated by users selecting one of modees.(HLC, BLC, WDR) 1. Move the triangular indicator to BACKLIGHT on the SETUP menu screen using the Up and Down button. 2. Select the desired mode by using the left or Right button. 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM RETURN MENU DC AUTO OFF MIDDLE AUTO OFF ◆ Off : Deactivated status.
◆ BLC : This fuction is used to counterbalance the screen image by increasing the brightness so that a subject which appears dark due to a strong backlight can be displayed in more detail. If you select BLC, a submenu appears where you can make finer adjustments. - H-POS/V-POS/H-SIZE/V-SIZE : Define the position and size of the area of interest by changing the position & size.
SPECO DNR This fuction is used to improve the picture quality by filtering the noise which is generated under low bright light conditions. You can set different levels here. 1. Move the triangular indicator to SPECO DNR by useing the Up and Down button. 2. Select the mode to use by pressing the left or Right button and LOW/MIDDLE/HIGH level selectable. 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.
◆ AUTO : Automatically, It shifts into the color mode in the bright environment and the B/W mode in the low light condition. It can adjust the delay time, starting brightness and end brightness according to the ambient conditions by pressing the Set button. 6.DAY&NIGHT SMART IR. AGC THRES AGC MARGIN DELAY RETURN |IIIIIIIIIIIIII| 0 |IIIIIII|IIIIII| 10 |IIIIIII|IIIIII| 10 LOW - SMART IR : 0~20 smart IR level adjustable. - AGC THRES : 0~20 AGC THRES level adjustable.
- EXTERN S/W [LOW/HIGH] : Set the external signal for switching between COLOR and B/W. - DELAY [LOW/MIDDLE/HIGH] : Set the delay time for switching between color and B/W . IMAGE When selecting, the following submenu will appear. 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM RETURN MENU DC AUTO OFF MIDDLE AUTO OFF Here you can optimise the image quality by adjusting different options. 7.IMAGE SHARPNESS |IIIIIII|IIIIII| 10 GAMMA 0.
- D-ZOOM : You can use the digital zoom with x1~x8 magnification. The higher the digital zoom magnification is, the lower the resolution is. - ACE [LOW/MIDDLE/HIGH] : Intelligent lightn level control to over come even strong backlight conditions. - DEFOG [ON, OFF] : This fuction helps to recognize the object in a dusty weather condition. ON, a submenu appears where you can make finer adjustments. - SHADING [ON, OFF] : Compensates the shading effects of lenses when the lens is set to a very wide angle.
MOTION This function is used to detect moving objects in the monitored area. When choosing ON, the following submenu will appear where you san adjust the settings for the MOTION function. 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM RETURN MENU DC AUTO OFF MIDDLE AUTO OFF 8.
SYSTEM This can be used when you want to select the additional function control. 1.When the SETUP menu is displayed, select SYSTEM using the Up and Down button. 2. Select one of the mode using the Up and Down button. 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM RETURN MENU DC AUTO OFF MIDDLE AUTO OFF 9.SYSTEM COM. IMAGE RANGE COLOR SPACE FRAME RATE CVBS LANGUAGE COLORBAR RESET RETURN USER HD-Cbcr 30 FPS NTSC ENG OFF ON - COM.
RETURN Press the Set button in the return menu to save the current settings and return the Set Up menu.
● Trouble Shooting PROBLEM Northing appears on the screen. POSSIBLE CAUSE FCheck the power cable, power supply output and video connection between the camera and monitor. FAre the camera lens or the lens glass dirty? The image on the screen is dim. Clean the lens / glass with a soft clean cloth. FAdjust the monitor controls, as required. FIf the camera is facing a very strong light, change the camera position. FAdjust the lens focus. The image on the screen is dark.
42
uMEMO 43
uMEMO 44
uMEMO 45
uMEMO 46
200 New Highway Amityville, NY 11701 631-957-8700 1 800 645 5516 www.specotech.
