User Manual

AI Event Management
NVR User Manual
56
② Set the successful recognition alarm linkage.
 Select one or more plate groups and then choose the schedule. Click “Manage” to set the schedule.
 Set the text prompt. When the captured plate is matched successfully, the text will appear on the right of the live view interface.
 Enable alarm output pulse (access control).
 Trigger record, snapshot, alarm-out, buzzer, push, pop-up video, E-mail and pop-up message box as needed. The alarm linkage settings are
similar to the face detection alarm (See 9.1.1 Face Detection Settings for details).
③ Set the strange plate alarm linkage. When the captured plate picture doesn’t match the plates in the plate database or their similarity is lower
than the set value, the captured plate will be regarded as a strange plate.
9.3 Tripwire
Tripwire/Line Crossing Configuration:
Alarms will be triggered if the people or vehicles cross the pre-defined alarm line.
① Click StartSettingsAI/EventAI Event Tripwire to go to the following interface.
② Select the camera, enable tripwire detection by IPC and set the duration.
Note: Some models may support tripwire detection by NVR.
③ Select the direction.
Direction: A<->B, A->B and A<-B optional. It is the crossing direction of the target that crosses over the alert line.
A<->B: the alarm triggers when the target crosses over the alert line from B to A or from A to B.
A->B: the alarm triggers when the target crosses over the alert line from A to B.