User Manual

Intelligent Analytics
NVR User Manual
61
10 Intelligent Analytics
10.1 Target Detection View
10.1.1 Human Body/Vehicle Detection View
Only when the camera supports human body/vehicle detection, can you view the real-time captured people or vehicle pictures. The setting steps
are as follow:
① Enable the Tripwire/Intrusion function of IPCs/NVR, draw the line or area and choose the detection target (see 9.3 Tripwire and 9.4 Intrusion
Detection for details).
② Go to live view interface and then click to go to the target detection interface of this channel. In this interface, you can switch the channel
on the top right. You can also click on the top right corner of the live view interface and then choose the target detection tab to go to the target
detection interface of multi-channel as shown below. Click the captured picture on the right of the live interface to see the snapshot detailed
information, such as snapshot time, camera, event type and target type.
Click “More” to bring up a dropdown list. You can export the captured pictures by clicking “Export” or view the target ID by clicking “Information”.
Click “Search” to go to smart human body/vehicle search interface. The system will automatically search captured people/vehicles. Click “Playback”
to go to the playback interface.
10.1.2 Face Detection/Match View
Only the face recognition NVR supports the following functions. If your NVR doesn’t support them, please skip the following instructions.
The setting steps are as follow:
① Enable face detection function (see 9.1.1 Face Detection Settings for details).
② Enable face recognition function and set the alarm linkage items (see 9.1.3 Face Recognition Settings for details).
③ Go to live view interface and click on a face detection channel. This will bring a toolbar under the channel. Then click to go to the target
detection interface of this channel. In this interface, you can switch the channel on the top right. You can also click on the top right corner of
the live view interface and then choose the target detection tab to go to the target detection interface of multi-channel as shown below.