User Manual

Device Management
NVR User Manual
93
Protocol type and EAPOL version: Please use the default settings.
User name and password: The user name and password must be the same with the user name and password applied for and registered in the
authentication server.
13.1.8 NAT Configuration
Click StartSettingsNetworkNAT to go to the interface for NAT configuration and check “Enable”. Click “Apply” to save the settings and make
note of the QR code number under the QR code. Via Internet Explorer, go to connect.specotech.cloud, input the QR code number, your username
and password to login.
You can also scan the QRCode through mobile client which is installed in the mobile phone or PAD to log in the mobile client instantly.
13.1.9 View Network Status
Click StartSettingsNetworkNetwork Status to view the network status or click on the tool bar at the bottom of the live view interface to
view network status conveniently.
13.2 Basic Configuration
13.2.1
General Configuration
Click StartSettingsSystemBasicGeneral Settings to go to the following interface. Set the device name, device No., language, video format
and main output. Enable or disable wizard, “Log In Automatically”, “Log Out Automatically” (if checked, you can set the wait time), “App Live Self-
Adaption” and “Dwell Automatically” (if checked, you can set the wait time). Click “Apply” to save the settings.