User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record & Disk Management
- 8 Playback & Export
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
Playback & Backup
NVR User Manual
40
② Check the event type in the interface as required.
③ Click to set the start time and end time on the top left of the interface.
④ Check cameras on the left side of the interface or check “All” to select all the cameras and then click to search the record. The searched
record will be displayed in the list.
⑤ Click in the list to play back the record in the popup window. Click to back up one record data or check multiple record data in the
list and then click “Backup” button for record batch backup.
⑥ Select one record data in the list and then click “Playback” button to play the record in the playback interface.
8.3.5 Bookmark Search
Only if you add the tags can you play the record by tag search. Click StartPlayback to go to the playback interface and then click on the
bottom of the camera window to add bookmarks when you want to mark the playback time point of the selected camera.
Click StartSearch and ExportBookmarks to go to “Bookmarks” tab.
Click in the interface to play the record. Click to edit the tag name. Click to delete the tag.
8.3.6 Snapshots
Click StartSearch and ExportSnapshots to go to “Snapshots” tab. The system will display all the captured images automatically in the list.
Click to delete the image. Click to pop up the “Export” window. Select the device name and save path in the window and then click
“Save” button.
Click to pop up the “View Image” window. Click to export the image. Click to view the previous image; click to view the
next image; click to delete the image; click to play all the images.