User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 EZ Setup & Main Interface
- 4 Camera Management
- 5 Live View Introduction
- 6 PTZ
- 7 Record & Disk Management
- 8 Playback & Export
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Specifications
Device Management
NVR User Manual
60
11.5 Backup and Restore
You can back up the configuration file of the NVR by exporting the file to other storage devices; you can recover the configuration to other NVRs
which are of the same model with the NVR by importing the configuration file to other NVRs for time saving.
Insert the USB storage device into the USB interface of the NVR and then click StartSettingsSystemMaintenanceBackup and Restore to go
to the interface.
Backup
Select the USB device in “Device Name” option; go to the path where you want to store the configuration backup file and then click “Backup” button;
finally click “OK” button in the popup window.
Recover
Select the USB device in “Device Name” option; find the configuration backup file and then click “Recover” button; finally click “OK” button in the
popup window.
11.6 Restart Automatically
You can set the automatic restart time for the NVR to maintain it regularly. Click StartSettingsSystemMaintenanceAuto Maintenance to go
to the interface as shown below. Enable auto maintenance, set the interval days and point of time and then click “Apply” to save the settings. The
NVR will restart automatically at the pointed time every interval days.
11.7 View Log
Click StartSettingsSystemMaintenanceView Log to go to the log view interface. Select the log main type, click to set start time and
end time and then click “Search” button. The searched log files will be displayed in the list.