User Guide

115
 Setup  Storage  Disk Info
8. RAID Fault Notification
When a RAID fault occurs, the following notifications occur within 30 minutes
 Message Box Pop-up (unconditional)
 System Log (unconditional)
 Alarm Output (conditional)
It can be enabled or disabled through “HDD Failure” item on the “System Event
Notification” menu.
 E-mail (conditional)
It can be enabled or disabled through “HDD Failure” item on the “System Event
Notification” menu
9. RAID Rebuilding Procedure
① In the “Setup  Storage  Disk Info” menu,
② Check if the RAID state is “Degrade” and remember the normal HDD numbers.
③ Select “System Shutdown” on the right-click menu. (Important !!!)
④ Power off.