Flexible Intensifier® Technology Bullet IP Camera QUICK INSTALLATION GUIDE O6FB7M Please read this manual carefully before installation and operation of the product.
Notice Thank you for purchasing this product. This guide is designed to be a reference tool for the product. Please read it carefully before operating the product and retain it for future reference. Should you require any technical assistance, please contact Speco Technologies Technical Support. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
PRECAUTIONS Please read the manual carefully before the installation in order to set up the camera correctly and to obtain the best picture quality. Please keep the manual in good condition for your future reference and service application. Installation and services should only be carried out by an authorized personnel according to local safety regulations.
1. PRODUCT OVERVIEW Key Features 6.82 Mega pixel 1/2.9" SONY progressive scan CMOS image sensor for excellent image quality IP67 rated water-proof Triple Streaming of H.265, H.
System Integration Physical Environment Intelligent Video Alarm Trigger Firmware Upgrade Etc Memory Slot Power Source Power Consumption Net Weight State LED's Dimension(mm) Operating Temperature Storage Temperature Motion detection (4 Separate blocks) Motion Detection Remote Upgrade via Network 1 x Factory Reset Button Micro SD card DC 12V / 1.5A, POE (Power Over Ethernet) : 802.3af Max.7.2W (IR ON) 1060g (Camera Only) Power, Network Connection Ø98.5 x 262.
2.2 Name and Function 1 2 3 4 7 5 6 8 9 10 NO. ITEM DESCRIPTION 1 BNC Analog Video Out (Yellow) 2 Power Connector DC12V 3 Network and POE Connector POE (Power Over Ethernet) and LAN cable 4 Sensor In / Alarm Out Sensor Input : White (Sensor_In), Yellow (GND) Alarm Output : Black (Alarm_Out), Red (COM) 5 Audio-Out Audio Out (White) 6 Audio-In Audio in (Red) 7 Lens 2.
2.3 OSD cap detailed description SD Card Factory Reset CVBS Closing Cap L-Wrench (2.5mm) Closing Cap Open Open the Closing Cap and fasten the Closing Cap well. 3. INSTALLATION 3.1 How to mount to wall Wall_Junction Box Tapping screw (Ø4 x 30) x 4 Plastic anchor x4 Screw x 4 Wall ① Drill four screw holes on the wall plate to fix four plastic anchors (supplied) in the holes. ② Fix the plastic anchors in the holes. ③ Position the bracket on the screw points.
3.2 3-Axis Adjustment ① Panning 360˚ Slightly loosen Pan Bracket nut then adjust pan of the camera and tighten the Bracket nut. ② Tilt 0˚ ~ 100˚ Slightly loosen Tilt bolt then adjust tilt of the camera and tighten the bolt firmly. Panning 360° Rotation 360° Rotation Tilt Pan Tilt 0°100° L-Wrench ③ Rotation 360˚ Slightly loosen Tilt bolt then adjust rotation of the camera and tighten the bolt firmly. 3.3 Installation Example 3.3.
3.3.2 Connecting Network Open up IP Scanner. IP Scanner can search for the device on the local network. Please note that only devices that are on the same subnet can be discovered. The device is set to DHCP mode by default. In the device list, you can view the IP address, model number, and MAC address of each device. Select the applicable device and double click to open up the web viewer. 3.3.
4.
