ONSIP OD101 User’s Guide ONSIP OD101 ` 1 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide Date Rev No rd 1.0 1.11 Apr. 3 , 2013 th Jun 6 , 2013 Description Document creation Text revision ` 2 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide Table of Contents 1. Product Overview ............................................................................................................................ 4 2. 1.1 Introduction to the ONSIP OD101 ............................................................................................. 4 1.2 Features ..................................................................................................................................... 4 1.3 Network Topology ............
ONSIP OD101 User’s Guide 1. Product Overview 1.1 Introduction to the ONSIP OD101 ONSIP OD101 is an embedded network video decoder. ONSIP OD101 takes a digital signal (sources provide by IP camera or DVS) from a network, and converts it to an analog video signal. When ONSIP OD101 is connected to more than one camera, it can cycle between the images provide by them. This function is called “Poll function”.
ONSIP OD101 User’s Guide 1.3 Network Topology Category Sub-Category Details Compression H.264 Video Resolution Audio (Bi-directional) Network I/O NTSC (30 frames/sec Max.) : 704x480, 640x480, 704x240, 352x240, 176x112 PAL/SECAM (25 frames/sec Max.) : 704x576, 640x480, 704x288, 352x288, 176x144 Up PCM 64 Kbps Down ADPCM 32 Kbps (G.726) Interface RJ-45, 10/100 Mbps, PoE (802.
ONSIP OD101 User’s Guide 1.4. Applications of ONSIP OD101 IP surveillance (buildings, stores, manufacturing facilities, parking lots, banks, government facilities, military, etc.. Real time Internet broadcasting Remote monitoring (hospitals, kindergartens, traffic, public areas, etc..) Teleconference (Bi-directional audio conference) Remote Learning Weather and environmental observation ` 6 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide 2. Operating Instructions 2.1 Package Contents Open the package and check if you have the followings: Contents Description ONSIP OD101 ONSIP OD101 main unit CD Software & User‟s Guide Quick Reference Guide Remarks Quick installation guide ` 7 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide 2.2. Product Preview ONSIP OD101 ONSIP-Installer H.264 Decoder PC software to allocate an IP address ` 8 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide 2.3. Physical description 2.3.1. External View Figure 2-1. External view of ONSIP OD101 2.3.1. Front and Rear Figure 2-2. Front Figure 2-3. Rear ` 9 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide 2.4. Functional Description Category Content RJ-45 PoE 12VDC input Adapter Video output CVBS In Standard PoE (IEEE802.3af) Max. 5W RS-485 Master 10/100Base-T 0.5A ~ 2.5A BNC Line Level (1Vpk) and micro phone Audio Out Misc. Configuration in administration tool Line Level (1Vpk) PTZ connection Terminated 100Base-T 100Mbps Ethernet connector (RJ-45) with PoE standard (802.3af).
ONSIP OD101 User’s Guide Factory Default Switch A switch provided for returning the product to factory default state. Press the switch for a few seconds while power is applied. Figure 2-5. Factory Default Switch Restoring the factory default will erase all settings. ` 11 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide 3. Getting Started 3.1. PC Requirement First of all, you should set up the ONSIP OD101 such as IP address using the ONSIP installer software and administration tool using Internet Explorer. Minimum requirement of the PC is described below: Recommended CPU Pentium III or above Main Memory 512MB or above Operating System * Remark Windows XP Web Browser Internet Explorer 6.
ONSIP OD101 User’s Guide 3.2. IP address configuration 1. Connect PC and ONSIP OD101 to network. 1) Prepare a PC to run programs for the installation and video connection (PC is needed to assign IP address to ONSIP OD101) 2) In the case of using PoE, connect the PC and ONSIP OD101 to the network using one of the following ways. If your LAN Switch does not support standard PoE, connect ONSIP OD101 as shown in dotted line in Figure 3-1. The DC power is applied through DC adapter.
ONSIP OD101 User’s Guide 3 1 2 9 10 5 4 7 6 8 Figure 3-2. IP installer Click on the field in ③ for sorting and rearranging the list. Select network mode that best suits from the drop down list in ⑤. You can choose either Static or ADSL and Auto (DHCP), respectively. If ADSL and Auto are selected, the fields in ⑥ is deactivated. In case of ADSL, fill the User Name and Password in ⑧ with the values provided by your ISP. ` 14 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide 3.3. Administration Tool configuration There is a way of connecting to the Decoder admin mode. Type in the connection address of the product in the address field of the Internet Explorer as followings: http://[IP address of the product], Example: http://172.16.43.244 Default ID and Passwork are “admin” and “1234”. Figure 3-3. Log-in window ` 15 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide 3.3.1. Basic Setup Figure 3-4 Basic Setup Field/Button System name Audio input selection Video format Sub Field Description /Button Input, edit and save the name of ONSIP OD101 here (support input English, letter and character). ONSIP OD101 name will be shown in the [Search List] window. When you use microphone, you should check the radio Mic button and volume. Line-in: When you use external audio signal, check it. Choose different output standard to matching different monitor.
ONSIP OD101 User’s Guide 3.3.2. Network Configuration Setup the network parameters appropriately in accordance with your network environment. Many of the parameters in this page are same as those set up by “ONSIP-Installer”.
ONSIP OD101 User’s Guide HTTP HTTP port is used for the connection to the admin page. Default is 80. You can restrict the access to the admin page from IP addresses beyond certain IP address range. Restrict Administrator Access Check at this box to restrict log on to the admin page. IP Filtering DDNS Base IP Address Input IP address of the PC which is intended to be used for log on to admin mode.
ONSIP OD101 User’s Guide 3.3.3. Group setup Setup the display group. Group can setup up to 16 groups and a group can setup up to 4 channels. Figure 3-6 Group Setup 1 channel 3 channels 2 channels 4 channels ` 19 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide Field/Button Group Apply / Delete Sub Field /Button Description Delete Deletion of all channel parameters Index Group number Channel 1~4 Assignment of each channel During Waiting time from 10 sec. to 120 sec. Enable You can select Enable or Disable. Save the setup parameters or delete selected check-box on Delete ` 20 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide 3.3.4. Session setup Figure 3-7 Session Setup Field/Button Sub Field /Button Delete Deletion of all channel parameters. Index Number of camera and video server lists. Name Session Address Port Channel ID/Password Apply / Delete Description Input the name. IP address and domain name of encoder. Default list table are blank, support input Internet IP, LAN IP and Internet domain name. (Suppose an encoder domain name, the address blank must input like this “ipcam.vicp.
ONSIP OD101 User’s Guide 3.3.5. User Admin & Time Setup Figure 3-8 User admin. & Time setup Field/Button User Administration Time Setup SAVE Sub Field /Button Description Administrator Username Admin ID. Default ID is “admin” Administrator password : Administrator Confirm Password Admin password. The default password is “1234”. Current Time It shows you the current time kept in the product.
ONSIP OD101 User’s Guide If you lost Administrator’s ID and password, the only means of recovery is to reset the settings to factory default, but then you lose your previous settings. ` 23 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide 3.3.6. PTZ setup This is the setup page for PTZ controller. Figure 3-9 PTZ Setup Field/Button Sub Field /Button PTZ controller Selection Description Choose the PTZ controller. Delete Button SAVE PTZ baud Rate Click on this button to delete. (Do not delete the default model.) Save the set-up parameters when PTZ controller setting is finished. Select this Baud rate to set the PTZ controller. SAVE Save the set-up parameters when baud rate setting is finished. ` 24 Rev. 1.
ONSIP OD101 User’s Guide 3.3.7. Upgrade & Reset You can upgrade the device via the IP network. Figure 3-10 Upgrade & Reset Contents of the upgradable system component should be downloaded from ONSIP‟s home page before the system upgrade is performed. Field/Button Manual Upgrade Add PTZ File Sub Field Description /Button Upgrade the system manually. Upgrade the system software installed on the product via System S/W network.
ONSIP OD101 User’s Guide Device does not resume the connections and the users must re-connect to the product manually. Upgrading the device. Unless otherwise instructed, the owners of the device are recommended to upgrade the system when upgraded firmware is released using manual upgrade procedure. Followings are the procedure to apply for the manual upgrade 1) Save the upgrade system software to your PC. Upgrade software can be downloaded from ONSIP‟s home page or provided in CD.
ONSIP OD101 User’s Guide 3.3.8. Status Report It shows you system records since the system started. You can check the problems as well as the versions and event status of the whole system and modules. ` 27 Rev. 1.11 (Jun.
ONSIP OD101 User’s Guide 4. Troubleshooting 4.1. No power is applied In case of Standard PoE (Power over Ethernet) Power supply through standard PoE is possible only when the following conditions are met. 1. Standard PoE is supported on the product. 2. The LAN switch supports standard PoE. Make sure that both the product and the LAN switch support standard PoE (IEEE 802.3af) In case of DC adapter If PoE is not applied, the power and network connection should be made through separate cables.
ONSIP OD101 User’s Guide 4.2. Cannot connect to the Video Check the status of the network connection through PING test. Try the following on your PC : - - Start > Run > Cmd > Ping IP address (Ex : Ping 172.16.42.51) If “Reply from ~” message is returned ( 1 in the figure below), the network connection is in normal state. Try connection to the video again. If the problem persists, or refer to other trouble shooting notes. If “Request timed out” message is returned.
ONSIP OD101 User’s Guide 4.3. Technical Assistance If you need any technical assistance, please contact your dealer. For immediate service please provide the following information. 1. Model name 2. MAC address and Registration number 3. Purchase date 4. Description of the problem 5. Error message ` 30 Rev. 1.11 (Jun.
