User Manual
12
For more information contact Speco Technologies
200 New Highway, Amityville, NY 11701• Toll Free: 1-800-645-5516•Fax: 631-957-9142 or 631-957-3880•www.specotech.com
· STOP/ EJECT: Will stop playing while source is active, or will eject CD if pressed when CD is
inserted and no source is playing
o
Press to stop and the LCD display will show the total number of tracks.
o
Press again to eject the disk; LCD display will show: “EJECT”
o
If pressed again while CD has not been removed, the disk will be automatically
reinserted.
·
CD / USB / SD / RADIO: Press the button to select the function of CD, USB, SD Card, or
RADIO mode.
· RAN / ENTER:
o
Press to play all songs in a random order. The LCD display shows “RANDOM”
o
Press again, LCD display shows “Enter” to confirm the “PROG” function.
(Please see “PROG” section for operating program function.)
·
REPEAT : Repeat play
o
If a CD is the active source playing analog tracks:
1.
Press once to constantly repeat current track. The LCD display shows “REPEAT
1”.
2.
Press again to constantly repeat whole CD. The LCD display shows “REPEAT ALL”
3.
Press again to cancel repeat function
o
If a CD, USB, or SD Card is the active source playing MP3 tracks:
1.
Press to constantly repeat current track. LCD display shows “REPEAT”
2.
Press again to constantly repeat current folder. LCD display shows ”REPEAT
FOLDER”
3. Then press again to repeat whole songs in the file. LCD display shows “REPEAT
ALL”
4. Press once again to cancel the REPEAT function.
·
FOLDER „„: Forward to next folder
·
FOLDER ƒƒ : Return to last folder
·
REV :
o
Press once to rewind to previous track
o
Press for 5 seconds to rewind through current track
·
FWD:
o
Press once to forward to next track
o
Press for 5 seconds to fast forward the current track
·
MUTE: Press to temporarily mute the module source.
·
PROG: Press to set presets.
o
To create a program of standard analog tracks from a CD:
1.
Press “PROG” and the LCD display will show “PROGRAM”
2.
Select desired song by using SKIP button, then press RAN/ENTER button once to
confirm. LCD display shows “00 01” for the first song
3. SKIP to the next song, and press RAN/ENTER twice to program as the 2nd song;
LCD display shows “00 02”
4. Repeat process for more songs (Maximum of 10)
5.
Press PLAY/II to start playing programmed songs
o
To program digital MP3 tracks from a CD, USB, or SD Card :
1.
Press “PROG”, LCD display shows “PROGRAM”