User Manual

13
For more information contact Speco Technologies
200 New Highway, Amityville, NY 11701• Toll Free: 1-800-645-5516•Fax: [phone] or 631-957-3880•www.specotech.com
2. Select desired songs by using FOLDER and SKIP button, then press RAN / ENTER
button once to confirm. LCD display shows “00 01” for the first song
3.
SKIP to the next song, and press RAN/ENTER twice to program as the 2nd song;
LCD display shows “00 02”
4. Repeat process for more songs (Maximum of 10)
5.
Press PLAY / II to start playing programmed songs
o
Press PROG again to cancel the program function
RADIO OPERATION:
·
Press “CD / USB / SD / RADIO” button and select Radio mode
·
BAND : For switching between AM and FM bands
·
TUN ▲ / TUN ▼: Press “▲” or ” ▼” to search station. Hold down for 3 seconds to
automatically scan stations. Scanning will stop when the unit reaches a station with good
reception
·
M1-M5 & M+5 buttons: These buttons are used to store stations in memory as presets. Up
to 20 stations can be stored: 10 AM and 10 FM
·
Press TUN ▲ / TUN ▼ button reach the desired station. Hold your choice of the M1
through M5 buttons for 3 seconds to store that station at that preset. To store in presets 6
through 10, press the M+5 button; LCD will show “M+5”, and then press your choice of the
M1 through M5 buttons for 3 seconds. Once the module has accepted the preset, the LCD
will flash CH#, with # being the number of the preset you selected.
·
To play a stored station, press the M1 through M5 button, or M+5 and then M1 through
M5.
Note: Your status from each mode will be saved if you leave and return. For example, if you
switch from radio mode to the CD and then return to the radio later, the module will resume
from the last station. If you switch to another mode, the module will resume from the last song.