Manual

Controls and Connections for the PL-260A P.A. Amplifier
FRONT PANEL
11
12
13
14
15
16
1
2
4
5
6
7
9
10
REAR PANEL
11
1
2
3
4
5
6
8
7
9
10
11 12
13
14 15
17
18
16
20
19
21
22
23
24
25
26
FRONT PANEL
1) MIC-1 input jack (1/4’’ phone jack).
2) MIC-5/AUX-1 Volume control.
3) AUX-2 Volume control.
4) AUX-3 Volume control.
5) Bass Control.
6) Treble Control.
7) Zone 1-7 selector switches.
8) All zone selector switch.
REAR PANEL
1) AC power cord.
2) Ground.
3) DC input terminals for battery backup.
4) Speaker output terminals.
5) AUX output RCA jacks.
6) Preamp output RCA jacks.
7) EQ / MIX input RCA jacks.
8) AUX-3 input RCA jacks.
9) AUX-2 input RCA jacks.
10) AUX-1 input RCA jacks.
11) AUX1/MIC5 input select switch.
12) MIC-5 (XLR connector) input.
13) MIC-4 (XLR connector) input.
*MOH = Music on hold
**TEL/PAGING= Connection input terminals for
general or emergency paging.
**TEL/PAGING is not to be connected directly to a
telephone circuit or TNV circuit.
9) Power on/off switch.
10) Power on indicator.
11) MIC-1 Volume control.
12) MIC-2 Volume control.
13) MIC-3 Volume control.
14) MIC-4 Volume control.
15) Master Volume control.
16) Output level indicator.
14) Individual Phantom Power on/off switches.
15) MIC-3 (XLR connector) input.
16) MIC-2 (XLR connector) input.
17) MIC-1 (XLR connector) input.
18) MIC-1 VOX voice override on/off switch.
19) AC accessory outlet (Unswitched).
20) Zone output 25V/70V select switch.
21) AC fuse holder.
22) Zone 1~7 output terminals.
23) MOH output level control.*
24) MOH output terminals.*
25) TEL / PAGING input terminals. (Balanced )**
26) TEL / PAGING input level control.**