Manual

Signal in Pre-Amplifier
PREAMP
OUT
EQ/MIX
IN
Power output stage
Speaker
STANDARD OPERATION
Signal in Pre-Amplifier
PREAMP
OUT
EQ/MIX
IN
Power output stage
Speaker
OPERATION WITH MIXER ,EQUALIZER
SOUND COMPRESSOR / LIMITER ETC.
IN
OUT
EQ/MIX
JUMPER
8) AUX-3 input RCA jacks. High impedance input available with parallel RCA jacks (for
combining stereo output accessories).
9) AUX-2 input RCA jacks. High impedance input available with parallel RCA jacks (for
combining stereo output accessories).
10) AUX-1 input RCA jacks. High impedance input available with parallel RCA jacks (for
combining stereo output accessories).
11) AUX1/MIC5 input selector switch. Allows for selection of either low impedance MIC5
input or high impedance AUX1 input.
12) MIC-5 (XLR connector) input. Accepts a balanced low impedance microphone signal
with an XLR connector.
13) MIC-4 (XLR connector) input. Accepts a balanced low impedance microphone signal
with an XLR connector.
14) Individual Phantom Power on/off switches. Allows for selection phantom power on or
off from MIC1 to MIC5.
15) MIC-3 (XLR connector) input. Accepts a balanced low impedance microphone signal
with an XLR connector.
16) MIC-2 (XLR connector) input. Accepts a balanced low impedance microphone signal
with an XLR connector.
17) MIC-1 (XLR connector) input. Accepts a balanced low impedance microphone signal
with an XLR connector.
18) MIC-1 VOX voice override on/off switch. MIC-1 inputs include VOX muting switch of the
MIC-2~5 and AUX-1~3 input during paging.
19) AC accessory outlet (Unswitched). Unswitched AC Auxiliary outlet for a 120VAC
50/60Hz power source.
20) Zone output 25V/70V select switch. Allows for selection of either 25V or 70V for
Zone1~7.