NXL NVR Quick Start Guide Version 1.1.
Welcome Thank you for purchasing this NVR. This guide is designed to be a quick reference for installing the system. Please read this guide carefully before installing and operating the unit. If technical assistance is needed, please contact Speco Technologies Technical Support. Phone: 1-800-645-5516 option 3 Email: techsupport@specotech.
1. Check Unit After unpacking the unit, please check for any visible damage. Then check to make sure that all accessories are included. 2. Product Label Check that the model number and serial number that’s listed on the label on the unit are the same as what’s listed on the package label. 3. Front Panel The front panel is shown as in Figure 1. Figure 1 Please refer to the following sheet for detailed information.
Port Name Connection Network port HDMI HDMI v1.4 VGA VGA output GND Power input port Function 10M/100Mbps Ethernet port. Connect to a network cable. Used for video output to a monitor/display with HDMI port Used for video output to a monitor/display with VGA port Ground end Input DC 12V/2A. MIC IN Audio input port Audio input port for two-way audio. Connect a microphone. MIC OUT Audio output port Audio output port to a speaker Two-way audio output. Audio output on full screen live view.
. Unit Login After the system boots up, the default video display is in multi-window mode. See Figure 3 for the login interface. Listed below is the default login ID: Username: admin (administrator, local and remote) Note: For security purposes, it is required to create the administrator password on the initial login. 5 incorrect login attempts within 30 minutes will result in a lock on the account. Once the unit is locked, please wait for 30 minutes before attempting to log in again.
