Wireless/Internet Speed Dial < Click 1. Make quick changes to the wireless card On/Off function. 2. “Open” to go directly to WLAN Utility screen for more information. WLAN Utility has 3 features (Status/Radio/About): *Status - Shows SSID, IP Address, Mac Address, Signal Strength, and Signal Quality information. *Radio - Enable/Disable Wi-Fi card and Power Saving mode selections. < Click On enables wireless network functions. < Click Off disables wireless network functions.
*About -- Shows SPECTEC connections info. < Driver: Current version of driver you installed. < Utility: Current version of utility you installed. < SPECTEC Web Site: http//:www.spectec.com.tw TM 802.11b www.spectec.com.tw < Technical Support: WLAN-11b support@spectec.com.
To Select Networks Manually After inserting Mini SDIO WLAN card into PDA, if the icon upper window, the network may be connected manually. TM 802.11b www.spectec.com.tw WLAN-11b 1 < From Start Menu/Settings/ Connections/Network Cards, select icon for a pull-down menu. Click Settings to go into the Settings/Connections window. < Click and hold Connect for 2 seconds, then click OK. All available network selections will appear.
CD info < Click Browse Contents button 1 to review all the files on CD 1 < Review all the files list on CD 13
Contact Us < Click Contact Us button 1 to review our information.
How to Upgrade Software Download the newest SD Device, please go to SPECTEC website: http://www.spectec.com.tw Click Save 1 1 How to Install Software 1. Driver (cab file) Take out the WLAN card, click “reset”, connect computer through Microsoft Active Sync, download Driver cab file copy to any list of PDA, click Yes to finish install. 2. Utility (.exe install) a. Cconnect Active Sync to PC b. Copy Utility 235.exe to myDevice/windows/startmenu/programs c. The icon will show up in Program. 3. Auto run: a.
AP Compatibility List Test condition and test environment DUT: WLAN-11b Vendor Accton ASUS Atheros BENQ BELKIN Model IG 2004W WL-500b Rate TX RX TX Auto 1.55 2.62 1.71 Buffalo WL-530g AR5002AP AWL700 F5D7230 RX TX RX TX RX TX RX TX RX TX RX TX RX 2.88 1.49 2.43 1.61 2.84 1.67 2.39 1.59 2.43 1.61 2.82 1.66 2.
Frequently Ask Question Q: After installing the CD-ROM, how many files will be installed onto the device? A: After installation, some dll files are installed in My Device\Windows, and the WLAN Utility in Programs. However, these files are quite small, and total about 300 KB. Q: How do I temporarily stop the wireless/internet connection? A: You can click on the “Off” button in WLAN Utility. When all 5 blue bars are white, Wi-Fi is disabled. Selecting the “On” setting will reconnect you to the internet.
Warranty hank you for your purchase of our product. For Spectec’s quality service, please read the following for your rights. 1. Warranty period is 1 year, starting from the date of original purchase. Please provide original purchase receipt with purchase date when inquiring for service. 2. This product has passed all quality control and AP tests for quality assurance. We suggest to use it with the AP list, and other accepted industry-standard equipments. 3.
License Aggreement CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE USING THIS PRODUCT. IT CONTAINS SOFTWARE, THE USE OF WHICHIS LICENSED BY SPECTEC, Co., Ltd., TO ITS CUSTOMERS FOR THEIR USE ONLY AS SET FORTH BELOW. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THE SOFTWARE. USING ANY PART OF THE SOFTWARE INDICATES THE ACCEPTANCE OF THESE TERMS.
SDW-821 SDIO WLAN-11b/g Card WLAN-11b/g SDIO WLAN Card www.spectec.com.tw Specifications Network Standard Support: IEEE 802.11b/g Network Architectures: Infrastructure, Ad-Hoc Data Rates: < 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps < 802.11b: 1, 2, 5.5, 11 Mbps Modulation Techniques: BPSK, QPSK, 16QAM, 64QAM, CCK, OFDM, DSSS Receiver Sensitivity: < 802.11g: 73~91 dBm < 802.11b: 89~97 dBm Power Consumption: Avg. Operating 138mA Supply Voltage: I/O: 3.0 - 3.6 Vdc Operating Temperature: 0.C to +70.
NOTE: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To comply with the FCC RF exposure compliance requirements, this device and its antenna must not to be co-located or operating to conjunction with any other antenna or transmitter.
TM 1b 802.1 www.s pecte c.com b N-11 WLA .tw W SD L A N IO W -11 LA N b/ Ca g ww rd w.s pec tec .co m.t w WLAN-1 1b FCC ID:S2YM 0012E60INIWLAN11B 00506 Thank You for Purchasing Spectec’s Products Spectec Computer Co., Ltd. www.spectec.com.
