User's Manual
Table Of Contents
- 1. General Description
- 2. Installation and Operation
- 3. Options
- 3.1 T01 Programmable Channel Spacing
- 3.2 T02 Programmable CTCSS encoder/decoder
- 3.3 T03 Programmable DCS/CTCSS encoder/decoder
- 3.4 T05 Balanced and Isolated VF plus E&M
- 3.5 T06 Simplex Changeover Relay
- 3.6 T08 VF Delay
- 3.7 T09 300Hz Upgrade HPF Filter
- 3.8 T10 Power Save Mode
- 3.9 T11 Combined Options
- 3.10 T12 External Reference Oscillator Input
- 3.11 T13 Local Speaker, Mic Socket and Front Panel Mute
- 3.12 T14 Local Channel Change
- 3.13 T16 1PPM Frequency Stability
- 3.14 U69 Extended Temperature Range Verification
- 3.15 T19/26 Line Interface Board.
- 3.16 T29 Balanced and Isolated VF plus E&M
- 3.17 T31 Network Adapter
- 3.18 T34 Ethernet option
- 3.19 T36 Option - TX Ref Oscillator input and Modulator
- 6. MX800 Base Station Fault Finding Procedure
- 7. Appendices
- 7.1 MX800 Interface Connections
- 7.2 CN2 DB9 Female Monitor Connector
- 7.3 CN3 DB25 Female Digital I/O Connector
- 7.4 MX800 Specifications
- 7.5 Channel Select DIP Switch Settings
- 7.6 MX800 Model Number Configuration Guide
- 7.7 MX800 System Applications
- 7.7.1 Conventional base station/repeater
- 7.7.2 Link transceiver
- 7.7.3 Data transceiver
- 7.7.4 Paging transmitter
- 7.7.5 Trunking Base Station
- 7.7.6 Systems base
- 7.7.7 Repeater with Morse ID
- 7.7.8 Simplex base station
- 7.7.9 Duplicated base station
- 7.7.10 Power Save base station
- 7.7.11 Tone key base station
- 7.7.12 Voting base station
- 7.7.13 Simulcast base station
- 8. Superseded Technical Information
- 9. Drawings
MX800 Transceiver General Description
The MX800 incorporates special technical features, of which the key ones are
listed below:
Extremely low conducted emissions
Extremely low transmitter spurious
Fast transmitter on time
Transmitter frequency response down to DC
Low group delay distortion
Very Wide RF switching bandwidth
No re-tune receiver or transmitter
Fully software programmable
Built in diagnostics
Trunking control and VF routing interface
Built in community multi-tone style repeater
High stability reference input for Simulcast systems
In addition, the MX800 can be fitted with many options, not being limited to
the following:
Programmable channel spacing
Programmable CTCSS / DCS encoder and decoder
Isolated VF and E&M lead interfaces
Simplex antenna changeover relay
VF audio delay for noiseless mute/squelch/repeater function
Low receiver standby current consumption
External reference oscillator input
Local speaker and microphone
Push wheel channel selector
High stability options
Audio Facilities board covers many new features
Internal Modem or Ethernet interface
Special high performance receiver options
Other custom features on special request
For further information, please contact Spectra Engineering.
© SPECTRA ENGINEERING 2008 Revision 4.3.1B
2