Technical Manual

ATLAS 4500 Multimode Station Technical Manual July 2016 1-5
Regulatory Information Section 1 - Introduction
This radio transmitter (identify the device by certification number, or model
number if Category II) has been approved by Industry Canada to operate with the
antenna types listed below with the maximum permissible gain and required
antenna impedance for each antenna type indicated. Antenna types not included in
this list, having a gain greater than the maximum gain indicated for that type, are
strictly prohibited for use with this device.
Immediately following the above notice, the manufacturer shall provide a list of all
antenna types approved for use with the transmitter, indicating the maximum
permissible antenna gain (in dBi) and required impedance for each.
Français
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou
son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par
Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et
ayant un gain admissible maximal et l'impédance requise pour chaque type
d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est
supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
l'émetteur.
1.3.6 IC RSS-102, Sec 2.6 Warning Statement
Requirements
The applicant is responsible for providing proper instructions to the user of the
radio device, and any usage restrictions, including limits of exposure durations. The
user manual shall provide installation and operation instructions, as well as any
special usage conditions, to ensure compliance with SAR and/or RF field strength
limits. For instance, compliance distance shall be clearly stated in the user manual.
The user manual of devices intended for controlled use shall also include
information relating to the operating characteristics of the device; the operating
instructions to ensure compliance with SAR and/or RF field strength limits;
information on the installation and operation of accessories to ensure compliance
with SAR and/or RF field strength limits; and contact information where the user
can obtain Canadian information on RF exposure and compliance. Other related
information may also be included.