Product Manual

6
– Flip button: Tapping this button provides the other
possible orientation for the arc. Tapping again this
button will bring the arc back to its initial shape.
8. Tap Solve when you agree with the definition of the arc,
which then appears on the plan. See example below.
Remember, you can always step back while creating an
arc (or a line) using the Back button when shown. Once the
arc (or line) has been created, it can be deleted by tapping
Undo at the bottom of the screen.
Closure Check As you enter the last point from the blueprint, a dialog box
appears and asks whether you want to add the point or
connect it to an existing point. See example below.
To perform a closure check at any time, select Perform Closure
Check from the Tools menu.
Use the zoom-in tool to see any error which can be caused by
a “bust” in the blueprint dimensions or entering the
dimensions incorrectly.
If a dialog box does not appear when you enter the last point
on your blueprint, your plan does not close or you must select
the Check for Overlapping Points function by selecting Options
from the Tools menu.